🔌 Công cụ tính chuỗi pin quang điện
Thiết kế chuỗi pin quang điện theo giới hạn điện áp của biến tần: Voc và Vmp hiệu chỉnh nhiệt độ, cửa sổ MPPT và tỷ lệ DC/AC. Ngăn quá áp khi trời lạnh và thiếu áp khi trời nóng.
🔌 Module & Inverter
📊 String Design
Dành cho nhà thiết kế và lắp đặt điện mặt trời chọn kích thước chuỗi theo thông số biến tần.
Cách tính toán
· Voc khi lạnh: Voc_max = Voc × (1 + α × (Tmin − 25) ÷ 100), α ≈ −0.34 %/°C.
· Vmp khi nóng: Vmp_min = Vmp × (1 + α × (Tmax − 25) ÷ 100).
· Số tấm tối đa = floor(Vmax ÷ Voc_max); tối thiểu = ceil(MPPT_min ÷ Vmp_min); mục tiêu ≈ Vmax × 0.85 ÷ Vmp.
Tiêu chuẩn tham chiếu
| Standard | Scope |
|---|---|
| IEC 62548 | Dàn pin quang điện — yêu cầu thiết kế |
| NEC 690.7 | Điện áp tối đa của hệ thống PV |
Ví dụ tính toán — tấm 550 W, biến tần 10 kW
1. Tấm 550 W (Voc 49.5 V, Vmp 41.5 V), biến tần 10 kW (Vmax 1000 V, MPPT 90–520 V), Tmin −10 °C, Tmax 60 °C.
2. Voc khi lạnh = 49.5 × (1 − 0.0034 × (−35)) = 55.4 V; Vmp khi nóng = 41.5 × (1 − 0.0034 × 35) = 36.6 V.
3. Số tấm tối đa = floor(1000 ÷ 55.4) = 18; tối thiểu = ceil(90 ÷ 36.6) = 3.
4. Khuyến nghị ≈ round(1000 × 0.85 ÷ 41.5) = 18 tấm mỗi chuỗi.
FAQ
How do I size a PV string against inverter voltage limits?
The string's temperature-corrected open-circuit voltage Voc must stay below the inverter maximum (commonly 1000 V or 1500 V), and the operating voltage Vmp must stay inside the MPPT window. Use the module temperature coefficients: Voc rises roughly 0.25-0.35%/deg C below 25 deg C. A 550 W module with Voc 49.5 V allows about 18-20 in series at -10 deg C on a 1000 V inverter.
What DC/AC ratio should a PV system use?
DC/AC ratio is array DC capacity divided by inverter AC rating. Typical values are 1.1-1.3 for most sites, up to 1.5 in high-latitude or high-albedo locations, to capture more energy when modules rarely reach STC output. Over 1.3-1.4 the inverter clips more peak power, and the marginal energy gain falls below the extra module cost.
Why does temperature affect PV string voltage?
Solar cell voltage drops as temperature rises. Module datasheets give temperature coefficients, typically -0.29%/deg C for Voc and -0.34%/deg C for power. At -10 deg C the voltage is about 10% above the 25 deg C value, so strings must be short enough not to exceed inverter limits in winter; at 70 deg C the voltage is ~13% lower, so strings must stay above the MPPT minimum.
How many modules per string is typical for a 550 W module?
With a 550 W module (Voc ~49.5 V, Vmp ~41.5 V) on a 1500 V inverter, strings of 28-32 modules are common; on a 1000 V inverter, 18-22 modules. The exact count depends on the minimum site temperature and the inverter MPPT range, so the calculator checks both the -10 deg C Voc and the 70 deg C Vmp bounds.
What is the difference between 1000 V and 1500 V PV systems?
1500 V systems allow longer strings (fewer combiner boxes, less cable and DC loss) and cut balance-of-system cost about 3-8% for utility plants, but need 1500 V-rated modules, inverters and protection. 1000 V remains standard for rooftop and small C&I. The calculator's string designer supports both voltage classes.
Nhúng công cụ này
Thêm công cụ tính toán này vào trang web của bạn miễn phí. Khung iframe thích ứng với mọi chiều rộng và chạy hoàn toàn trong trình duyệt của khách truy cập.
Công cụ liên quan
Giá trị ước tính tham chiếu (FOB Qingdao, EXW) chỉ dành cho thiết kế sơ bộ — không phải báo giá cuối cùng. Hãy xác nhận kích thước theo dự án và tiêu chuẩn địa phương của bạn.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.