🔌 Công cụ tính & chọn máy biến áp
Nhập tải kết nối của bạn để nhận kVA máy biến áp tiêu chuẩn, model được khuyến nghị và giá tham chiếu theo giá đồng. Bao gồm trạm biến áp dầu, khô, hợp kim vô định hình và kiểu hộp.
⚙️ Your Load & Thông số kỹ thuậts
📊 Result
Dành cho kỹ sư điện, nhà thầu và người mua chọn kích thước máy biến áp phân phối từ tải.
Cách tính toán
· Tính kích thước — chế độ kW: kVA = Tải (kW) ÷ Hệ số công suất; chế độ kVA: kVA = Tải; chế độ Ampe: kVA = √3·U·I (3 pha).
· Dung lượng thiết kế: kVA_thiết kế = kVA × (1 + hệ số dự phòng %).
· Lựa chọn: kVA tiêu chuẩn kế tiếp theo dãy ưu tiên IEC R10; giá = cơ sở × cuộn dây × hiệu suất × hệ số điện áp, với ±3% cho mỗi 1.000 USD/tấn đồng đối với cuộn dây đồng.
Tiêu chuẩn tham chiếu
| Standard | Scope |
|---|---|
| IEC 60076-1 | Các mức kVA ưu tiên (dãy R10) cho máy biến áp lực |
| GB/T 1094 | Tương đương Trung Quốc của IEC 60076, các mức định mức máy biến áp lực |
Ví dụ tính toán — tải 500 kW → máy biến áp 800 kVA
1. Tải 500 kW, hệ số công suất 0.85 → kVA = 500 ÷ 0.85 = 588 kVA.
2. Hệ số dự phòng 20% → kVA_thiết kế = 588 × 1.20 = 706 kVA.
3. Kích thước R10 tiêu chuẩn kế tiếp = 800 kVA (kiểu khô SCB13, 10/0.4 kV, cuộn đồng).
4. Giá tham chiếu từ bảng giá trực tiếp, liên kết với giá đồng LME.
FAQ
How do I calculate the transformer kVA I need?
Transformer kVA = total load kW x demand factor / Power Factor. For 300 kW of load at 0.85 pf with 0.8 demand factor: 300 x 0.8 / 0.85 = 282 kVA, so select 315 kVA. Leave 15-20% headroom for growth and select the next standard rating per IEC 60076. The calculator does this and returns the model and price.
What is the difference between oil-immersed and dry-type transformers?
Oil-immersed units are cheaper (10-30% less), quieter under load and better cooled, suited to outdoor and larger ratings; dry-type cast-resin units are fire-safe, suited to indoor, hospitals and high-rises, but cost more and run hotter. Dry-type is mandatory for many indoor installations per fire codes. The calculator prices both types.
What does S13, SCB13 and S20 mean in a transformer model?
S-series is oil-immersed (S11/S13/S20/S22), SCB is dry-type cast-resin. The number is the efficiency/loss grade — higher numbers mean lower No-Load Loss. S13 cuts no-load loss ~20-30% versus S11; S20/S22 are the current GB 20052 energy-efficiency grades. The calculator lets you pick the grade and shows the price delta.
What vector group do I need — Dyn11 or Yyn0?
Dyn11 (delta primary, wye secondary, 30 deg shift) is standard for distribution because it blocks third-harmonic circulation and supports unbalanced load better. Yyn0 is used for small single-phase-heavy loads but passes zero-sequence harmonics. For most modern LV networks choose Dyn11; the calculator defaults to it.
How much does a 500 kVA transformer cost?
A 500 kVA oil-immersed S13 transformer runs roughly $12,000-18,000 FOB, and a dry-type SCB13 roughly $16,000-24,000, varying with copper price (base ~14,200 USD/t), winding material and tap-changer. The calculator returns a live reference FOB price from the QDTB pricing matrix, updated with copper.
Nhúng công cụ này
Thêm công cụ tính toán này vào trang web của bạn miễn phí. Khung iframe thích ứng với mọi chiều rộng và chạy hoàn toàn trong trình duyệt của khách truy cập.
Công cụ liên quan
Giá trị ước tính tham chiếu (FOB Qingdao, EXW) chỉ dành cho thiết kế sơ bộ — không phải báo giá cuối cùng. Hãy xác nhận kích thước theo dự án và tiêu chuẩn địa phương của bạn.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.