🔋 Akü Boyutlandırma Hesaplayıcısı
Yedekleme veya tepe yük azaltma için bir LiFePO4 akü boyutlandırın: yük ve özerklikten gerekli kapasite, seri/paralel yapılandırma, DoD'ye bağlı çevrim ömrü ve uyumlu bir PCS, malzeme listesiyle birlikte.
🔋 Load & Autonomy
📊 Battery Design
Akü ve güç dönüştürme sistemlerini boyutlandıran güneş ve depolama tasarımcıları için.
Nasıl hesaplanır
· Gerekli kapasite: E = Yük (kW) × saat ÷ DoD ÷ verimlilik.
· Seri hücreler: seri = V_system ÷ 3.2 (LFP hücre).
· C-oranı kontrolü: yük ÷ kapasite ≤ 1.0 C önerilir.
Referans standartlar
| Standard | Scope |
|---|---|
| IEC 61427 | Yenilenebilir enerji depolama için ikincil hücreler |
| IEC 62619 | İkincil lityum hücre ve akülerin güvenliği |
Çözümlü örnek — 4 saat için 10 kW → 46.8 kWh
1. Yük 10 kW, yedekleme 4 saat, DoD %90, verimlilik %95.
2. Gerekli = 10 × 4 ÷ 0.90 ÷ 0.95 = 46.8 kWh.
3. 51.2 V sistem → seride 16 hücre; en yakın küme yapılandırması seçildi.
4. C-oranı = 10 ÷ 46.8 = 0.21 C (0.5–1.0 C içinde); uyumlu PCS seçildi.
FAQ
How do I size a battery from load and autonomy?
Battery energy = daily load kWh x autonomy days / depth of discharge / round-trip efficiency. For 20 kWh/day load, 1 day autonomy, 80% DoD and 90% efficiency: 20 / 0.8 / 0.9 = 27.8 kWh, so select a 30 kWh bank. The calculator computes capacity and matches standard rack/cabinet sizes.
What is depth of discharge and why does it matter?
Depth of discharge is the fraction of capacity used per cycle. LFP batteries tolerate 80-90% DoD for 6,000+ cycles; lead-acid lasts longest at 50% DoD. Deeper discharge shortens cycle life, so the battery is oversized to respect the DoD limit. The calculator applies DoD to the usable-capacity calculation.
How long does a battery last in cycle life?
LFP cells deliver 6,000-8,000 cycles at 80% DoD (roughly 15-20 years at one cycle/day), while NMC gives 3,000-5,000 and lead-acid 500-1,200. Calendar life and temperature also matter — operating above 35 deg C accelerates degradation. The calculator reports cycle-life implications for the sized bank.
How do I match a PCS to the battery?
The PCS power rating must cover the peak load and charge rate, and its DC voltage range must match the battery string. For a 30 kWh bank serving a 10 kW peak load, select a 10-15 kW PCS. The calculator matches PCS power and battery DC voltage to the sized bank.
What battery capacity do I need for peak-shaving?
For peak-shaving, the battery must cover the peak demand above the target for the duration of the peak window, usually 2-4 hours. Shaving 100 kW for 3 hours needs 300 kWh usable, or ~375 kWh at 80% DoD. The calculator sizes the bank for the shaving window and quantifies demand-charge savings.
Bu hesaplayıcıyı gömün
Bu hesaplayıcıyı kendi web sitenize ücretsiz ekleyin. iframe her genişliğe uyum sağlar ve tamamen ziyaretçinizin tarayıcısında çalışır.
İlgili araçlar
Yalnızca ön tasarım için referans tahminler (FOB Qingdao, EXW) — nihai teklif değildir. Boyutlandırmayı projenize ve yerel standartlara göre doğrulayın.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.