💰 Calculadora de rendimiento solar y amortización
Estime la energía anual generada, el coste nivelado de la energía (LCOE), la amortización simple y el beneficio neto durante la vida útil a partir de la capacidad instalada, las horas de sol pico, el índice de rendimiento, la tarifa y el coste del sistema.
💰 Energy & Finance
📊 Yield & Payback
Para propietarios y promotores que evalúan la economía de un sistema FV.
Cómo se calcula
· Energía anual: E = kWp × horas de sol pico × 365 × PR.
· Generación durante la vida útil: E_total = E × Σ(1 − degradación)^n.
· LCOE = coste del sistema ÷ E_total; amortización = coste ÷ ingresos anuales.
Normas de referencia
| Standard | Scope |
|---|---|
| IEC 61724 | Monitorización y análisis del rendimiento de sistemas fotovoltaicos |
Ejemplo resuelto — 10 kWp → 11,680 kWh/año
1. 10 kWp, 4 horas de sol pico, PR 0.80.
2. Rendimiento anual = 10 × 4 × 365 × 0.80 = 11,680 kWh.
3. Con una tarifa de 0.12 $/kWh, los ingresos anuales ≈ 1,402 $; el LCOE y la amortización se obtienen a partir del coste de su sistema.
FAQ
How is solar payback period calculated?
Simple payback = system cost divided by annual savings. A 10 kW system costing $9,000 that saves $1,200/yr pays back in 7.5 years. Discounted payback also applies a discount rate. The calculator uses 25-year life, 0.5%/yr degradation and local tariff to compute simple payback, IRR, NPV and 25-year net profit.
What LCOE is typical for a residential solar system?
Residential rooftop solar LCOE typically runs $0.06-0.12/kWh depending on irradiation and cost; utility-scale solar reaches $0.03-0.05/kWh. In a 4-5 sun-hour region, a $1,000/kW residential system lands near $0.07-0.09/kWh. The calculator computes full-cost LCOE including O&M, WACC and inverter replacement.
How much does module degradation reduce output over 25 years?
Standard modules degrade about 0.5-0.7% per year, with a first-year drop of 1-2%, giving roughly 85-88% of rated power after 25 years. The calculator applies a 0.5%/yr linear degradation, so year-25 output is about 87.5% of year-1. This materially lowers lifetime LCOE estimates.
What is the difference between P50 and P90 in payback?
P50 payback uses the median year's generation (shorter payback); P90 uses the conservative 90%-exceedance year (longer payback). Lenders underwrite on P90. With 4-6% interannual variability, P90 payback is roughly 1-2 years longer than P50 for a 7-year project. The calculator reports both yield and economics at P50/P75/P90.
Does solar make sense without subsidies?
Yes in most regions. Where module-plus-install costs have fallen to $800-1200/kW and tariffs exceed $0.10/kWh, unsubsidized solar typically pays back in 6-10 years and delivers 10-15% IRR over 25 years. The calculator uses your tariff and system cost to show payback and IRR without assuming any subsidy.
Insertar esta calculadora
Añada esta calculadora a su propio sitio web de forma gratuita. El iframe se adapta a cualquier ancho y se ejecuta íntegramente en el navegador de sus visitantes.
Herramientas relacionadas
Estimaciones de referencia (FOB Qingdao, EXW) solo para diseño preliminar — no constituyen una cotización final. Confirme el dimensionamiento según su proyecto y las normas locales.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.