🔌 เครื่องคำนวณขนาดสตริงโซลาร์เซลล์
ออกแบบสตริงโซลาร์เซลล์ตามขีดจำกัดแรงดันของอินเวอร์เตอร์: ค่า Voc และ Vmp ที่ปรับตามอุณหภูมิ ช่วง MPPT และอัตราส่วน DC/AC ป้องกันแรงดันเกินในอากาศหนาวและแรงดันต่ำเกินในอากาศร้อน
🔌 Module & Inverter
📊 String Design
สำหรับผู้ออกแบบและผู้ติดตั้งโซลาร์ที่คำนวณขนาดสตริงตามสเปกอินเวอร์เตอร์
วิธีการคำนวณ
· Voc ในอากาศหนาว: Voc_max = Voc × (1 + α × (Tmin − 25) ÷ 100), α ≈ −0.34 %/°C
· Vmp ในอากาศร้อน: Vmp_min = Vmp × (1 + α × (Tmax − 25) ÷ 100)
· จำนวนโมดูลสูงสุด = floor(Vmax ÷ Voc_max); จำนวนต่ำสุด = ceil(MPPT_min ÷ Vmp_min); เป้าหมาย ≈ Vmax × 0.85 ÷ Vmp
มาตรฐานอ้างอิง
| Standard | Scope |
|---|---|
| IEC 62548 | แผงเซลล์แสงอาทิตย์ — ข้อกำหนดการออกแบบ |
| NEC 690.7 | แรงดันสูงสุดของระบบโซลาร์เซลล์ |
ตัวอย่างการคำนวณ — โมดูล 550 W, อินเวอร์เตอร์ 10 kW
1. โมดูล 550 W (Voc 49.5 V, Vmp 41.5 V), อินเวอร์เตอร์ 10 kW (Vmax 1000 V, MPPT 90–520 V), Tmin −10 °C, Tmax 60 °C
2. Voc หนาว = 49.5 × (1 − 0.0034 × (−35)) = 55.4 V; Vmp ร้อน = 41.5 × (1 − 0.0034 × 35) = 36.6 V
3. จำนวนโมดูลสูงสุด = floor(1000 ÷ 55.4) = 18; ต่ำสุด = ceil(90 ÷ 36.6) = 3
4. ที่แนะนำ ≈ round(1000 × 0.85 ÷ 41.5) = 18 โมดูลต่อสตริง
FAQ
How do I size a PV string against inverter voltage limits?
The string's temperature-corrected open-circuit voltage Voc must stay below the inverter maximum (commonly 1000 V or 1500 V), and the operating voltage Vmp must stay inside the MPPT window. Use the module temperature coefficients: Voc rises roughly 0.25-0.35%/deg C below 25 deg C. A 550 W module with Voc 49.5 V allows about 18-20 in series at -10 deg C on a 1000 V inverter.
What DC/AC ratio should a PV system use?
DC/AC ratio is array DC capacity divided by inverter AC rating. Typical values are 1.1-1.3 for most sites, up to 1.5 in high-latitude or high-albedo locations, to capture more energy when modules rarely reach STC output. Over 1.3-1.4 the inverter clips more peak power, and the marginal energy gain falls below the extra module cost.
Why does temperature affect PV string voltage?
Solar cell voltage drops as temperature rises. Module datasheets give temperature coefficients, typically -0.29%/deg C for Voc and -0.34%/deg C for power. At -10 deg C the voltage is about 10% above the 25 deg C value, so strings must be short enough not to exceed inverter limits in winter; at 70 deg C the voltage is ~13% lower, so strings must stay above the MPPT minimum.
How many modules per string is typical for a 550 W module?
With a 550 W module (Voc ~49.5 V, Vmp ~41.5 V) on a 1500 V inverter, strings of 28-32 modules are common; on a 1000 V inverter, 18-22 modules. The exact count depends on the minimum site temperature and the inverter MPPT range, so the calculator checks both the -10 deg C Voc and the 70 deg C Vmp bounds.
What is the difference between 1000 V and 1500 V PV systems?
1500 V systems allow longer strings (fewer combiner boxes, less cable and DC loss) and cut balance-of-system cost about 3-8% for utility plants, but need 1500 V-rated modules, inverters and protection. 1000 V remains standard for rooftop and small C&I. The calculator's string designer supports both voltage classes.
ฝังเครื่องคำนวณนี้
เพิ่มเครื่องคำนวณนี้ลงในเว็บไซต์ของคุณได้ฟรี iframe ปรับตามความกว้างใดก็ได้ และทำงานทั้งหมดในเบราว์เซอร์ของผู้เยี่ยมชม
เครื่องมือที่เกี่ยวข้อง
เป็นการประมาณการอ้างอิง (FOB ชิงเต่า, EXW) สำหรับการออกแบบเบื้องต้นเท่านั้น — ไม่ใช่ใบเสนอราคาสุดท้าย โปรดตรวจสอบขนาดกับโครงการและมาตรฐานท้องถิ่นของคุณ
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.