หม้อแปลงไฟฟ้า QDTB®

💰 เครื่องคำนวณผลผลิตพลังงานแสงอาทิตย์และการคืนทุน

ประมาณผลผลิตพลังงานรายปี ต้นทุนพลังงานเฉลี่ย (LCOE) ระยะเวลาคืนทุนอย่างง่าย และกำไรสุทธิตลอดอายุ จากกำลังติดตั้ง ชั่วโมงแสงแดด อัตราส่วนสมรรถนะ อัตราค่าไฟ และต้นทุนระบบ

เริ่มคำนวณ
⚠️ Estimates for planning only — actual yield depends on site irradiation, orientation and losses.

💰 Energy & Finance

📊 Yield & Payback

Enter capacity and sun hours — yield, LCOE and payback appear here instantly.

สำหรับเจ้าของและผู้พัฒนาโครงการที่ประเมินความคุ้มค่าทางเศรษฐศาสตร์ของระบบโซลาร์เซลล์

วิธีการคำนวณ

· พลังงานรายปี: E = kWp × ชั่วโมงแสงแดดสูงสุด × 365 × PR

· ผลผลิตรวมตลอดอายุ: E_total = E × Σ(1 − การเสื่อม)^n

· LCOE = ต้นทุนระบบ ÷ E_total; การคืนทุน = ต้นทุน ÷ รายได้รายปี

มาตรฐานอ้างอิง

StandardScope
IEC 61724การตรวจวัดและวิเคราะห์สมรรถนะของระบบโซลาร์เซลล์

ตัวอย่างการคำนวณ — 10 kWp → 11,680 kWh/ปี

1. 10 kWp, ชั่วโมงแสงแดดสูงสุด 4, PR 0.80

2. ผลผลิตรายปี = 10 × 4 × 365 × 0.80 = 11,680 kWh

3. ที่อัตราค่าไฟ $0.12/kWh รายได้รายปี ≈ $1,402; ค่า LCOE และการคืนทุนขึ้นกับต้นทุนระบบของคุณ

FAQ

How is solar payback period calculated?

Simple payback = system cost divided by annual savings. A 10 kW system costing $9,000 that saves $1,200/yr pays back in 7.5 years. Discounted payback also applies a discount rate. The calculator uses 25-year life, 0.5%/yr degradation and local tariff to compute simple payback, IRR, NPV and 25-year net profit.

What LCOE is typical for a residential solar system?

Residential rooftop solar LCOE typically runs $0.06-0.12/kWh depending on irradiation and cost; utility-scale solar reaches $0.03-0.05/kWh. In a 4-5 sun-hour region, a $1,000/kW residential system lands near $0.07-0.09/kWh. The calculator computes full-cost LCOE including O&M, WACC and inverter replacement.

How much does module degradation reduce output over 25 years?

Standard modules degrade about 0.5-0.7% per year, with a first-year drop of 1-2%, giving roughly 85-88% of rated power after 25 years. The calculator applies a 0.5%/yr linear degradation, so year-25 output is about 87.5% of year-1. This materially lowers lifetime LCOE estimates.

What is the difference between P50 and P90 in payback?

P50 payback uses the median year's generation (shorter payback); P90 uses the conservative 90%-exceedance year (longer payback). Lenders underwrite on P90. With 4-6% interannual variability, P90 payback is roughly 1-2 years longer than P50 for a 7-year project. The calculator reports both yield and economics at P50/P75/P90.

Does solar make sense without subsidies?

Yes in most regions. Where module-plus-install costs have fallen to $800-1200/kW and tariffs exceed $0.10/kWh, unsubsidized solar typically pays back in 6-10 years and delivers 10-15% IRR over 25 years. The calculator uses your tariff and system cost to show payback and IRR without assuming any subsidy.

ฝังเครื่องคำนวณนี้

เพิ่มเครื่องคำนวณนี้ลงในเว็บไซต์ของคุณได้ฟรี iframe ปรับตามความกว้างใดก็ได้ และทำงานทั้งหมดในเบราว์เซอร์ของผู้เยี่ยมชม

เครื่องมือที่เกี่ยวข้อง

เป็นการประมาณการอ้างอิง (FOB ชิงเต่า, EXW) สำหรับการออกแบบเบื้องต้นเท่านั้น — ไม่ใช่ใบเสนอราคาสุดท้าย โปรดตรวจสอบขนาดกับโครงการและมาตรฐานท้องถิ่นของคุณ

Send my complete design report

Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.

💬 Chat on WhatsApp

Your data stays private. No spam — only a reply to your enquiry.