📦 Calculateur de prix de coffret de dérivation de câbles
Obtenez un prix FOB de référence pour un coffret de dérivation de câbles de la série DFW à partir de sa tension, de son courant nominal et de sa quantité — utile pour un chiffrage rapide de projet.
⚙️ Spécificationss
📊 Result
Pour les entrepreneurs et les acheteurs qui estiment les coffrets de distribution de câbles pour leurs projets.
Comment c'est calculé
· Prix de référence = base × facteur de tension × facteur de courant × facteur de quantité.
· Base de référence : DFW-12 inox, 1 entrée/4 sorties, 12 kV, 630 A.
Normes référencées
| Standard | Scope |
|---|---|
| GB/T 7251 | Ensembles d'appareillage à basse tension |
Exemple détaillé — coffret de dérivation 12 kV, 630 A
1. Tension 12 kV, courant nominal 630 A, quantité 1.
2. Facteur = tension × courant × quantité (tous à 1,0 à la base de référence).
3. Prix de référence = milieu de la fourchette de base du DFW-12.
FAQ
What is a cable branch box (DFW) and when is it used?
A cable branch box (DFW series) is an outdoor enclosure that splits a main cable into multiple branch feeders without switching, used in urban LV and 10 kV distribution to feed several loads from one cable. It saves cost versus a full Switchgear line-up. Ratings typically run 400-630 A at 0.4 kV.
How do I choose the current rating of a branch box?
The branch box current rating must exceed the maximum demand current of the combined branches, with 20-25% margin. A 250 A main with four 63 A branches is a typical LV arrangement. The calculator sizes the box by voltage and rated current and returns a reference FOB price.
What is the difference between a cable branch box and a ring main unit?
A branch box only splits cables — no switching, no protection — so a fault downstream must be cleared upstream. An RMU adds load-break switches and (optionally) a breaker for isolation and protection. Branch boxes are cheaper and used for simple radial taps; RMUs for ring networks needing switching.
What ingress protection does an outdoor branch box need?
Outdoor cable branch boxes need IP44 or higher (IP54 for dusty or coastal sites) to resist rain and dust ingress. Enclosures are usually stainless steel or GRP with anti-corrosion coating, and are padlockable and vermin-proof. The calculator's pricing reflects the standard weatherproof enclosure and mounting type.
How much does a cable branch box cost?
A 0.4 kV cable branch box runs roughly $600-1,500 FOB depending on ways and current; a 10 kV branch box $1,500-3,200. Price scales with the number of branches and the current rating. The calculator returns a live reference price from the pricing matrix.
Intégrer ce calculateur
Ajoutez ce calculateur à votre propre site web gratuitement. L'iframe s'adapte à toutes les largeurs et s'exécute entièrement dans le navigateur de vos visiteurs.
Outils associés
Estimations de référence (FOB Qingdao, EXW) pour la conception préliminaire uniquement — pas un devis final. Confirmez le dimensionnement selon votre projet et les normes locales.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.