💰 Calculateur de rendement solaire et d'amortissement
Estimez le rendement énergétique annuel, le coût actualisé de l'énergie (LCOE), l'amortissement simple et le bénéfice net sur la durée de vie à partir de la capacité installée, des heures d'ensoleillement, du ratio de performance, du tarif et du coût système.
💰 Energy & Finance
📊 Yield & Payback
Pour les propriétaires et les développeurs qui évaluent la rentabilité d'un système PV.
Comment c'est calculé
· Énergie annuelle : E = kWp × heures de plein soleil × 365 × PR.
· Production sur la durée de vie : E_total = E × Σ(1 − dégradation)^n.
· LCOE = coût système ÷ E_total ; amortissement = coût ÷ revenu annuel.
Normes référencées
| Standard | Scope |
|---|---|
| IEC 61724 | Surveillance et analyse des performances des systèmes photovoltaïques |
Exemple détaillé — 10 kWp → 11 680 kWh/an
1. 10 kWp, 4 heures de plein soleil, PR 0,80.
2. Rendement annuel = 10 × 4 × 365 × 0,80 = 11 680 kWh.
3. À un tarif de 0,12 $/kWh, le revenu annuel ≈ 1 402 $ ; le LCOE et l'amortissement découlent de votre coût système.
FAQ
How is solar payback period calculated?
Simple payback = system cost divided by annual savings. A 10 kW system costing $9,000 that saves $1,200/yr pays back in 7.5 years. Discounted payback also applies a discount rate. The calculator uses 25-year life, 0.5%/yr degradation and local tariff to compute simple payback, IRR, NPV and 25-year net profit.
What LCOE is typical for a residential solar system?
Residential rooftop solar LCOE typically runs $0.06-0.12/kWh depending on irradiation and cost; utility-scale solar reaches $0.03-0.05/kWh. In a 4-5 sun-hour region, a $1,000/kW residential system lands near $0.07-0.09/kWh. The calculator computes full-cost LCOE including O&M, WACC and inverter replacement.
How much does module degradation reduce output over 25 years?
Standard modules degrade about 0.5-0.7% per year, with a first-year drop of 1-2%, giving roughly 85-88% of rated power after 25 years. The calculator applies a 0.5%/yr linear degradation, so year-25 output is about 87.5% of year-1. This materially lowers lifetime LCOE estimates.
What is the difference between P50 and P90 in payback?
P50 payback uses the median year's generation (shorter payback); P90 uses the conservative 90%-exceedance year (longer payback). Lenders underwrite on P90. With 4-6% interannual variability, P90 payback is roughly 1-2 years longer than P50 for a 7-year project. The calculator reports both yield and economics at P50/P75/P90.
Does solar make sense without subsidies?
Yes in most regions. Where module-plus-install costs have fallen to $800-1200/kW and tariffs exceed $0.10/kWh, unsubsidized solar typically pays back in 6-10 years and delivers 10-15% IRR over 25 years. The calculator uses your tariff and system cost to show payback and IRR without assuming any subsidy.
Intégrer ce calculateur
Ajoutez ce calculateur à votre propre site web gratuitement. L'iframe s'adapte à toutes les largeurs et s'exécute entièrement dans le navigateur de vos visiteurs.
Outils associés
Estimations de référence (FOB Qingdao, EXW) pour la conception préliminaire uniquement — pas un devis final. Confirmez le dimensionnement selon votre projet et les normes locales.
Send my complete design report
Get the full bill of materials, single-line diagram, calculation steps and FOB pricing as a PDF — free, no sign-up.
Your data stays private. No spam — only a reply to your enquiry.